Recommended
Fully built-in Hood Perfelli BI 6112 I LED
5902429920516

Built-in hood, power: 550 m3 / h. Width: 600 mm. color - stainless steel. Mechanical push-button control. 3 speeds. Lighting: LED 2x3 watts. Aluminum filter Art.0020 (the required amount in the hood is 1pc.). Operating modes: Exhaust / recycling. Noise level: 53 dB. Optional Carbon Filter Art. 0021
Always be the winner! Pragmatic use of the working space and an excellent design solution in the Perfelli BI 6112 I hood. The maximum hood capacity with free air outlet is 550 m3 / h. The control panel is located on the front of the instrument. It consists of five mechanical buttons that include fan speed changeover and other control functions. The hood lighting consists of two 3W LED lamps. The cooker hood is equipped with a practical aluminum filter that can be cleaned simply and easily in warm soapy water. The hood can operate in the air extraction and recirculation mode *.
* In recirculation mode, this model can only work if the carbon filter is installed. The charcoal filter must be purchased separately from the device. There may not be a suitable filter in our product line, but it will be available from other manufacturers.
Data sheet
picture_as_pdf Microfiche BI 6112 I
picture_as_pdf Energycard BI 6112 I
picture_as_pdf Instruction BI 6112
- Type of hood
- Fully built-in
- Type of installation
- Built in
- Colour
- Stainless steel
- Width, cm
- 60
- Control type
- Mechanical push button
- Timer
- ✗
- Display
- ✗
- Lighting
- LED 2х3 W
- Grease filter
- Aluminum panel
- Number of speeds
- 3
- Operation modes
- Air exhaust / recirculation
- Maximum performance, m³/h — (with free air outlet)
info
Maximum performance
(with free air outlet) - the indicator is calculated without taking into account the connection of the device to the duct, the length / material / diameter of the duct and in the absence of corrugation and box.
- 550
- Capacity at IEC point, m3/h
info
Productivity
(under typical operating conditions) - the indicator is measured when connected to a hood (with filter and adapter flange) with an air duct of about 2 meters with two bends at 90 degrees, which simulates the real working conditions of the hood, plus creating a resistance of 15 Pa to determine minimum efficiency.
- 198
- Motors number/power, W
- 1 / 110
- Noise level, dB
- 53
- The diameter of the hole of the duct, cm
- 12
- Optional carbon filter Art.
- 0021
- Network connection
-
Voltage: 220-240 V
Frequency: 50 - 60 Hz - Country of Manufacture
- Poland
- Equipment
- Instructions. Warranty card. Vent valve. Mounting kit. Grease filter aluminum (3 layers). cord with plug. power card
- Net weight, kg
- 4.8
- Gross weight, kg
- 5.8
- Dimensions without packaging (WxHxD), cm
- 60х13.5х29
- Packing dimensions (WxHxD), cm
- 65.5х21х35.5