Inclined wall hood, power: 750 m3 / h. Width: 600 mm. color - the white tempered glass. Stainless steel case. Touch control. 3 speeds. Timer. Lighting: LED 2x3 watts. Aluminum filter Art.0012 (the required quantity in the hood is 1pc.). Operating modes: Exhaust / recycling. Noise level: 55 ...
Decorative hood with a glass dome, power: 750 m3 / h. Width: 600 mm. color - stainless steel. Toughened tinted glass. Curved line of decorative glass. Mechanical control. 3 speeds. Lighting: halogen 2x20 watts. Aluminum filter Art.0013 (the required amount in the hood is 1pc.). Operating ...
Inclined wall-mounted hood, capacity: 1000 m3 / h. Width: 600 mm. Decor material / Color - white glass. Touch control. 3 speeds. Timer 30 min. Lighting: LED 2x3 W. Operating modes: Removal / recirculation. Noise level: min. 52 - max. 63 dB.
Inclined wall hood, power: 900 m3 / h. Width: 600 mm. color beige tempered glass. Painted steel body. Mechanical push-button control. 3 speeds. Lighting: LED 2х3 W. Aluminum filter Art.0012 (the required amount in the hood is 1pc.). Operating modes: Exhaust / recycling. Noise level: 54 dB. ...
Decorative Incline Hood Perfelli DNS 67103 B 1100 BL LED Strip
Inclined wall hood, power 1100 m3 / h., Width - 600 mm, color of the hood - black. The material of the hood is tempered glass. Touch control. 4 speeds. 1 motor. Lighting 2x3 W LED Strip. Aluminum filter. Exhaust / Recycling. The noise level is 40-62 dB. Timer
The excellent hood Perfelli DNS 67103 B 1100 BL LED Strip differs from other decorative models not only in design, but also in performance and quiet operation of the motor. The hood operates at the minimum speed with an acceptable daily noise level of 40 dB, so it will not interfere with enjoying the silence and calmly clean the workspace from unpleasant odors. The maximum exhaust capacity with free air outlet is 1100 m3 / h. The control panel is located in the center front of the hood. It consists of four touch buttons that are responsible for switching fan speeds and turning on the light. The hood illumination consists of one oblong 3W LED lamp. The cooker hood is equipped with a practical aluminum filter that can be cleaned simply and easily in warm soapy water. The hood can operate in the air extraction and recirculation mode *.
* In recirculation mode, this model can only work if a carbon filter is installed. The charcoal filter must be purchased separately from the device. There may not be a suitable filter in our product line, but it will be available from other manufacturers.
- Type of hood
- Width. cm
- Decoration material
- Strained glass
- Type of installation
- Wall mounted
- Maximum performance. m³/h — (with free air outlet)
(with free air outlet) - the indicator is calculated without taking into account the connection of the device to the duct, the length / material / diameter of the duct and in the absence of corrugation and box.
- Capacity at IEC point, m3/h
(under typical operating conditions) - the indicator is measured when connected to a hood (with filter and adapter flange) with an air duct of about 2 meters with two bends at 90 degrees, which simulates the real working conditions of the hood, plus creating a resistance of 15 Pa to determine minimum efficiency.
- Number of motors
- Number of motors/Motor power. W
- 1 / 230
- Number of speeds
- Operation mode
- Air exhaust / recirculation
- Noise level. dB
- The diameter of the hole of the duct. cm
- 12 – 15
- LED 2 x 3 W
- Grease filter
- aluminum panel
- Additional decorative lighting
- Fireproof Motor Cover
- Network connection
Voltage: 220-240 V
Frequency: 50 - 60 Hz
- Dimensions without packaging (WxHxD). cm
- Packing dimensions (WxHxD). cm
- Net weight. kg
- Gross weight. kg
- 12 months
- Country of Manufacture