Inclined wall hood, power 1100 m3 / h., Width - 600 mm, color of the hood - black. The material of the hood is tempered glass. Touch control. 4 speeds. 1 motor. Lighting 1x3 W LED Strip. Aluminum filter. Exhaust / Recycling. The noise level is 40-62 dB. Timer
Decorative hood with a print, power: 1000 m3 / h. Width: 600 mm. color-tempered black glass. Stainless steel case. Mechanical push-button control. 3 speeds. Lighting: halogen 2x20 watts. Aluminum filter. Operating modes: recycle / recirculation. Noise level: 55 dB. Optional Carbon Filter Art. ...
Inclined wall-mounted hood, capacity 850 m3 / h, width - 595 mm, hood color - black. The material of the hood is tempered glass. Mechanical push-button control 3 speeds. 1 motor. Lighting 2x1 W LED. Aluminum filter. Discharge / Recirculation. Noise level - 54.5 - 59 dB
Inclined wall hood, power: 1200 m3 / h. Width: 900 mm. color - the white tempered glass. Touch control. 3 speeds. Timer. Lighting: LED 2x3 watts. Aluminum filter Art.0012 (the required amount in the hood - 2 pcs.). Operating modes: Exhaust / recycling. Noise level: 51-68 dB. Optional Carbon ...
Decorative Incline Hood Perfelli DNS 6723 B 1100 BL LED Strip
Inclined wall hood, power 1100 m3 / h., Width - 600 mm, color of the hood - black. The material of the hood is tempered glass. Touch control, side switch. 4 speeds. 1 motor. Lighting 1x3 W LED Strip. Aluminum filter. Exhaust / Recycling. The noise level is 40-62 dB. Timer
The perfect variant of the decorative inclined hood Perfelli DNS 6723 B 1100 BL LED Strip is equipped with a highly efficient motor and timer function, which will help clean the air in the kitchen without unnecessary hassle and energy consumption. The maximum exhaust capacity with free air outlet is 1100 m3 / h. The control panel is located in the center front of the hood. It consists of five touch buttons and a display, which are responsible for switching fan speeds and turning on the lights. The hood illumination consists of one oblong 3W LED lamp. The cooker hood is equipped with a practical aluminum filter that can be cleaned simply and easily in warm soapy water. The hood can operate in the air extraction and recirculation mode *.
* In recirculation mode, this model can only work if a carbon filter is installed. The charcoal filter must be purchased separately from the device. There may not be a suitable filter in our product line, but it will be available from other manufacturers.
- Type of hood
- Width. cm
- Decoration material
- Strained glass
- Type of installation
- Wall mounted
- Maximum performance. m³/h — (with free air outlet)
(with free air outlet) - the indicator is calculated without taking into account the connection of the device to the duct, the length / material / diameter of the duct and in the absence of corrugation and box.
- Capacity at IEC point, m3/h
(under typical operating conditions) - the indicator is measured when connected to a hood (with filter and adapter flange) with an air duct of about 2 meters with two bends at 90 degrees, which simulates the real working conditions of the hood, plus creating a resistance of 15 Pa to determine minimum efficiency.
- Number of motors
- Number of motors/Motor power. W
- 1 / 230
- Number of speeds
- Operation mode
- Air exhaust / recirculation
- Noise level. dB
- The diameter of the hole of the duct. cm
- 12 – 15
- 1х3 W LED Strip
- Grease filter
- aluminum panel
- Network connection
Voltage: 220-240 V
Frequency: 50 - 60 Hz
- Dimensions without packaging (WxHxD). cm
- Packing dimensions (WxHxD). cm
- Net weight. kg
- Gross weight. kg
- 12 months
- Country of Manufacture