Hood telescopic Perfelli TLS 9833 BL LED Strip
Telescopic hood, power: 1000 m3 / h. Width 500 mm. White colour. mechanical push-button control. 3 speeds. Lighting: halogen 2x20 watts. Aluminum filter. Operating modes: Exhaust / recycling. Noise level: 55 dB. Optional Carbon Filter Art. 0028
Telescopic hood, power 1200 m3 / h., Width - 600 mm. The color of the hood / drawer is black. The material of the hood / hood is painted metal. Mechanical control, switch on the side. 3 speeds. 1 motor. Lighting 2x2 watts. LED. Aluminum filter (2x). Retraction / Recirculation. Noise Level ...
Telescopic hood, power: 850 m3 / h. Width is 600 mm. black colour. mechanical push-button control. 2 speeds. Lighting: 1x28 watts. Aluminum filter. Operating mode: Exhaust / recycling. Number of motors 2. Noise level: 55 dB. Optional Carbon Filter Art. 0022
Telescopic hood, motor power 70 W, width 600 mm. The hood color is white. The hood material is painted metal. Mechanical control. 3 speeds. 1 motor. Lighting 1x4 W. LED. Aluminum filter with stainless perforation. Discharge / Recirculation. Noise level 60-63 dB.
5902429921728
Telescopic hood, power: 1200 m3 / h. Width 900 mm. color - black tempered glass. Touch control. Timer. 4 speeds. Lighting: LED strip 2x2.1 watts. Aluminum filter Art.0008 (the required amount in the hood - 4 pcs.). Operating mode: Exhaust / recycling. Noise level: 55 dB. Optional Carbon Filter Art. 0029
Perfelli TLS 9833 LED Strip is a wonderful solution for freshness in your kitchen. The maximum exhaust capacity with free air outlet is 1200 m3 / h. The control panel is located at the front of the hood. It consists of touch buttons that are responsible for switching fan speeds and turning on the light. The hood lighting consists of two elongated 2.1 W LED lamps. The hood is equipped with a practical aluminum filter, which is decorated with a metal panel. It can be washed simply and easily in warm soapy water. The hood can operate in the air extraction and recirculation mode *.
* In recirculation mode, this model can only work if the carbon filter is installed. The charcoal filter must be purchased separately from the device. There may not be a suitable filter in our product line, but it will be available from other manufacturers.
(under typical operating conditions) - the indicator is measured when connected to a hood (with filter and adapter flange) with an air duct of about 2 meters with two bends at 90 degrees, which simulates the real working conditions of the hood, plus creating a resistance of 15 Pa to determine minimum efficiency.
(with free air outlet) - the indicator is calculated without taking into account the connection of the device to the duct, the length / material / diameter of the duct and in the absence of corrugation and box.