Hood decorative T-shaped Perfelli T 6111 A 550 I
Decorative T-shaped hood, power: 750 m3 / h. Width: 900 mm. color is stainless steel. Mechanical push-button control. 3 speeds. Lighting: halogen 2x20 watts. Aluminum filters. Operating modes: Exhaust / recycling. Noise level: 56 dB. Optional Carbon Filter Art. 0026
Decorative T-shaped hood, power: 550 m3 / h. Width: 600 mm. black colour. Mechanical push-button control. 3 speeds. Lighting: halogen 2x35 watts. Aluminum filters. Operating modes: Exhaust / recycling. Noise level: 61 dB. Optional Carbon Filter Art. 0031 (1 pc.).
5902767151788
Decorative T-shaped hood, power: 550 m3 / h. Width: 600 mm. color is stainless steel. Mechanical push-button control. 3 speeds. Lighting: halogen 2x35 watts. Aluminum filters. Operating modes: Exhaust / recycling. Noise level: 61 dB. Optional Carbon Filter Art. 0031 (1 pc.).
Do you want an unusual and not expensive hood for your small kitchen? Then take a look at the Perfelli T 6111 A 550. The maximum exhaust capacity with free air outlet is 550 m3 / h. The control panel is located at the front of the hood. It consists of five mechanical buttons that include fan speed changeover and other control functions. The hood lighting consists of two 35 W halogen lamps. The cooker hood is equipped with a practical aluminum filter that can be cleaned simply and easily in warm soapy water. The hood can operate in the air extraction and recirculation mode *.
* In recirculation mode, this model can only work if the carbon filter is installed. The charcoal filter must be purchased separately from the device. There may not be a suitable filter in our product line, but it will be available from other manufacturers.
(with free air outlet) - the indicator is calculated without taking into account the connection of the device to the duct, the length / material / diameter of the duct and in the absence of corrugation and box.
(under typical operating conditions) - the indicator is measured when connected to a hood (with filter and adapter flange) with an air duct of about 2 meters with two bends at 90 degrees, which simulates the real working conditions of the hood, plus creating a resistance of 15 Pa to determine minimum efficiency.