Hood decorative T-shaped Perfelli TS 6822 I/BL LED
Decorative T-shaped hood, power: 750 m3 / h. Width: 900 mm. color is stainless steel. Mechanical push-button control. 3 speeds. Lighting: halogen 2x20 watts. Aluminum filters. Operating modes: Exhaust / recycling. Noise level: 56 dB. Optional Carbon Filter Art. 0026
Decorative T-shaped hood, power: 1200 m3 / h. Width: 600 mm. color-tempered black glass. Stainless steel case. Touch control. 4 speeds. Timer. Lighting: halogen 2x20 watts. Aluminum filter Art.0014 (the required amount in the hood - 2 pcs.). Operating modes: Exhaust / recycling. Noise level: ...
В наличии
5902767155083
Decorative T-shaped hood, capacity 1200 m3 / h, width - 600 mm. Hood color - stainless steel, front panel - black tempered glass. Hood material - stainless steel. Touch control. 4 speeds. 1 motor. Lighting 2x2 W LED. Aluminum filter. Retraction / Recycling. Noise level 51-70 dB. Timer - 90 minutes
The clear lines and excellent functionality of the T-shaped cooker hood Perfelli TS 6822 I / BL LED will bring harmony to your kitchen interior and transform it beyond recognition. The maximum exhaust capacity with free air outlet is 1200 m3 / h. The control panel is located on the front of the hood. It consists of four touch buttons that are responsible for switching fan speeds and turning on the light. The hood lighting consists of two 2 W round LED lamps. The cooker hood is equipped with a practical aluminum filter that can be easily and easily washed in warm soapy water. The hood can operate in the air extraction and recirculation mode *.
* In recirculation mode, this model can only work if the carbon filter is installed. The charcoal filter must be purchased separately from the device. There may not be a suitable filter in our product line, but it will be available from other manufacturers.
(with free air outlet) - the indicator is calculated without taking into account the connection of the device to the duct, the length / material / diameter of the duct and in the absence of corrugation and box.
(under typical operating conditions) - the indicator is measured when connected to a hood (with filter and adapter flange) with an air duct of about 2 meters with two bends at 90 degrees, which simulates the real working conditions of the hood, plus creating a resistance of 15 Pa to determine minimum efficiency.